Description: The automatic gear trainer transmission teaching equipment displays the structure and working principles of automobile transmission. This automatic transmission trainer transmission teaching equipment is based on the original automobile transmission system components, and is arranged according to the location layout of the original automatic transmission. The automatic gear trainer transmission teaching equipment is suitable for the teaching needs of the theory and maintenance training of automobile transmission system in vocational and technical schools, colleges and universities, training institutions.
Specification:
Power supply: AC 380V/220V. 50Hz.
Product composition
Mobile stand with test panel: 1 set.
Ignition switch: 1 pcs.
Dashboard: 1 set.
Automatic transmission assembly: 1 set.
Automatic transmission ECU: 1 set.
Diagnostic seat: 1 pcs.
Pressure gauge: 1 pcs.
Gear shift lever: 1 pcs.
Frequency converter: 1 pcs.
Brake mechanism: 1 set.
Drive motor: 1 pcs.
Fault set module: 1 set.
Main features
The drive motor is used as the engine to drive the automatic transmission and can make the transmission shift the gear automatically by adjusting the speed through the frequency converter.
The stalls distribution can be observed through the gear position indicator.
The oil pressure variation at each gear can be observed by the pressure gauge.
The circuit principal diagram of the automatic transmission is printed on the bench panel.
Fault can be set to simulate the failure of the automatic transmission.
Training courses
Function introduction of main components of the automatic transmission.
Demonstration of the work principle and process of the automatic transmission.
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope.
Fault set and troubleshooting.
