Description: Realistic and operable central control door lock and alarm system used to illustrate the structure and operation. The device is designed based on the B5 central control door lock and alarm system to holistically demonstrate the structure and operation. Operate the key or lock switch to simultaneously open or close the four doors of the vehicle. If the alarm system is enabled after the ignition key is turned off and the alarm status is set, the alarm siren sounds, the flasher blinks, and the starter is disabled, demonstrating the operation of the central control door lock and alarm system.
Features:
The training panel is made of advanced aluminum-plastic plate with circuit and working principle diagrams painted on the board. Trainees can learn and analyze the working principles by referencing the diagrams and real components.
Equipped with detection terminals on the panel for measuring electrical signals such as resistance, voltage, current, and frequency of the circuit components.
The training panel's base frame is made of steel and the surface is paint-coated. Self-locking wheels are installed, and a 40cm² tabletop is fixed on the base frame to place materials and light testing devices.
Connects to a 220V AC power supply, which is internally converted to 12V DC, eliminating the need for accumulators and charging. The 12V DC power supply includes short-circuit protection.
Equipped with an intelligent fault setting and appraisal system, including functions for fault setting, troubleshooting, and assessment.
Components:
Detection control panel, central control door lock system, alarm system components, advanced aluminum-plastic plate with diagrams, detection terminals, steel base frame with self-locking wheels, intelligent fault setting and appraisal system, 40cm² tabletop.
Specification:
Size: 1600mm x 700mm x 1700mm (L x W x H).
External power supply: A.C. 220V ± 10% 50Hz.
Operating voltage: 12V DC.
Operating temperature: -40? to +50?.
