Description: Training bench with instrument housing consist of Training Bench Height: 815mm Width: 1570mm Depth: 900mm. It suitable for electrical & electronics engineering students for learning various types of equipment's such as oscilloscope, RF signal generator, soldering station, DC power supply etc.
Technical Specification:
#Training bench – 1 Nos.
#Oscilloscope– 1 Nos.
#DC power supply– 1 Nos.
#Function Generator– 1 Nos.
#RF Generator– 1 Nos.
#Digital multimeter– 1 Nos.
#AC power supply: 1 Nos.
#Soldering station: 1 Nos.
#AC outlet – 1 Nos.
#Test leads holder– 1 Nos.
Training Bench:
Brand: SB-TEK.
Model: SBHT-04.
Country of origin: China.
Technical Specification:
#Training bench: Height: 815mm, Width: 1570mm, Depth: 900mm, 4 adjustable stands or 4 wheels.
Oscilloscope:
Brand: SB-TEK.
Model: MOS620CH.
Country of origin: China.
Technical Specification:
#CRT: 6? rectangular screen with internal gratitude, 8x10div (1div = 1cm).
#Bandwidth: 20MHz.
#Display mode: CH1. CH2. ADD, ALT, CHOP.
#Deflection factor: 5mV/div to 5V/div ±3%. 1mV/div to 1V/div ± 5%(X5).10 steps.
#Rise time: ?17.2ns.
#Max. Input voltage: 250V (DC+AC peak) ?1KHz.
#Input coupling: AC. DC. GND.
#Polarity selection: + or - (CH2 only).
#Display mode: 1,10, X-Y.
#Time Base: 0.2us/div to 0.2s/div,9 ranges.
#Sweep magnification: X10.
#Accuracy: ±3%.
#Trigger mode: NORM, AUTO, TV-V, TV-H.
#Trigger source: CH1.CH2. VERT. LINE. EXT.
#Sensitivity and Frequency: 20Hz-30MHz (VERT).
#AUTO. NORM: 0.5div (INT), 0.5Vp-p(EXT).
#TV-V, TV-H: At least 1 div or 1 Vp-p.
#Input impedance: 1M?.
#X-Y Phase difference: ?3°, DC-50kHz.
#Calibration waveform: Frequency: 1kHz ±20%, voltage :0.5V ±10%.
#Power supply: 220V/110V ± 10%; 50/60HZ.
#Dimensions: Approx. 310(W) X 130(H) X 370(D)mm.
#Weight: About 8.5KG.
DC power supply
Brand: SB-TEK.
Model: SB2-DC.
Country of origin: China.
Technical Specification:
#Output voltage: 0-30V.
#Output current: 0- 5A.
#Ripple & Noise: CV 1mVrms, CC 3mArms.
#Display Accuracy: (0.5% Rdg +2 digits).
#Power source: 220-240v AC, 50Hz.
#Dimensions(WxHxD): Min 130x165x305 mm.
#Weight: Min 6Kg.
Function Generator:
Brand: SB-TEK.
Model: SB9060.
Country of origin: China.
Technical Specification:
#Frequency range: 0.3-3MHz.
#Output waveform: Sine, triangle, Square, positive or negative pulse wave of, positive or negative ramp.
#Output Impedance: 50?±10.
#Amplitude modulation: Not smaller than 20Vp-p(open).
#DC offset: 0~±10V continuous adjustable.
#Symmetry Range: 80:10~10:80.
#Rising Edge of square wave: 100ns or 50ns.
#Sine Wave Characteristic.
#Distortion: 10Hz-100KHz lees than 1.
#Frequency Response: 0.1Hz to 100KHz not larger than ± 0.5dB, 100KHz to 3MHz not larger than ± 1dB, 100KHz to 6MHz not larger than ± 2dB, 100KHz to 10MHz not larger than ±3dB, 100KHz to 15MHz not larger than ± 3.5dB.
#TTL output.
#Level: TTL the low level of impulse wave is not larger than 0.4v, high level is not smaller than 2.4V.
#Rise time: Not larger than 30ns.
#Modulating frequency: 400Hz internal, 01MHz external.
#Modulation Depth: 0-85%.
#Deviation: 0-10%.
#Modulating frequency: 400Hz internal, 01MHz external.
#Distortion of modulation frequency: ?1.5% (fc=500KHz fm=1kHz,10%).
#Power output (Model with W).
#Amplitude: Not smaller than 20Vp-p Power.
#Sweep mode: Liner; logarithmic.
#Sweep speed:10ms~5s.
#Sweep ratio: ? 1000:1.
#Output amplitude: 7Vp-p.
#Output impedance: 600?.
#VCF input.
#Output voltage: -5V~0V ± 10%.
#Max ratio of voltage control: 1000:1.
#Input signal: DC-1KHz.
#Frequency Meter.
#Measuring range :1Hz-20MHz.
#input impedance: Not smaller than 1M? / 20pF.
#Sensitivity: 10mVrms.
#Max input: 150V(AC+DC) (attenuator included).
#Input attenuation: 20db.
#Measuring error: Not larger than 0.003% ± 1digit.
#Power Supply: 220V/110V±10%, 50/60HZ.
#Dimension: Approx.310X230X90mm.
#Weight: About 4 kg.
RF Signal Generator
Brand: SB-TEK.
Model: SB-TSG-17.
Country of origin: China.
Technical Specification:
#Frequency range A:100KHz-300KHz/ B: 300KHz-1MHz/ C: 1MHz-3.2MHz/ D: 3MHz-10MHz/E: 10MHz-35MHz/ F: 32MHz-150MHz.
#Frequency range: 100KHz-150MHz (3rd harmonic wave up to 450MHz).
#Frequency accuracy: 13%.
#Output waveform: RF/AM signal waveform.
#Output impedance: 600 ohms.
#Radio frequency output: Over 100mVrms output.
#Level control: 1mV-100mV.
#Internal modulation: 1Khz ± 2%>2Vrm output External modulation: 50Hz-20KHz for any setting.
#Normal operator temperature/ humidity: 10°C to 35°C/ with 85%RH.
#Power supply: 220V / 110V +/-10%; 50/60Hz.
Digital Multi Meter
Brand: SB-TEK.
Model: SB133B.
Country of origin: China.
Feature:
#Over voltage/current audible alarm.
#High voltage warning.
#Auto power off (can be disabled).
#Low power consumption.
#Fast and accurate capacitance measurement.
#2m drop proof.
Technical Specifications:
#DC voltage (V): 600mV/6000mV/60V/600V, ± (0.5%?3).
#AC voltage (V): 600V, ± (1.2%+3).
#DC current (A): 600uA/60mA/600mA/10A, ± (1%+2).
#AC DC current (A): 10A.
#Resistance(?):600? / 6000? / 60k? / 600k? / 60M?, ± (0.8%+2).
#Capacitance(F):9.999nF / 99.99nF / 999.9nF / 9.999?F / 99.99?F / 999.9?F / 9.999mF, ± (4%+5).
#Display count: 6000.
#Range selection: Manual.
#Diode: yes.
#Continuity buzzer: Yes.
#NCV: Yes.
#LCD backlight: yes.
#Test probe holder: yes.
#Data hold: yes.
#Low battery indication: yes.
#Overload indication: yes.
#Power: 1.5V battery (R03) x 2.
#Display: Min 56.8mm x 36.1mm.
#Net weight: About 255g (with batteries).
#Dimension: Approx.155mm x 76.5mm x 49mm.
#Standard accessories: English Manual.
AC Power supply:
Brand: SB-TEK.
Model: SB1-AC.
Country of origin: China.
#Input voltage: 220V AC ± 10%, 50 Hz.
#Output voltage: 0~30V.
#Output Current: 0-5 A DC.
#Source Effect: CV ?0.01% ± 3mV, CC ?0.5% ± 3mA.
#Load Effect: CV ?0.05% ± 3mV, CC ?0.05% ± 10mA.
#Ripple & Noise: ? 5mVrms CC ? 20mA.
#Display: Double 4 light LED display.
#Protection: Current limit protection, short circuit protection, overload protection and heat protection.
#Working Temperature: 0±400 C, RH <90%.
#Voltage Display precision: LED ±1 % + 5 digit.
#Dimension: Approx.24X13X15 cm.
#Weight: Less than 2 kg.
Soldering station:
Brand: SB-TEK.
Model: SB-207B.
Country of origin: China.
Feature:
#Adjustable temperature control with lock/set screw.
#Temperature range 392°-896°F (200°- 480°C).
#Maintains idle temperature within 1.8°F (1°C).
#Ceramic heating element and sensor insures rapid heat-up temperature (30 seconds) and Lightning-fast thermal recovery.
#Celsius or Fahrenheit temperature setting.
#Temperature adjusted by simply turning the dial.
#Slender iron handles are insulated and ergonomic-designed for ease and comfort.
#Accommodates large, medium or small irons.
#Wide selection of tips available for soldering SMD and through-hole connections.
Technical Specification:
#Consumption: 60W.
#Output Voltage: 24V AC.
#Temperature: 200°C - 480°C (392°F - 896°F).
#Temperature Stability: ±1.0°C (1.8°F).
#Dimensions: Approx.120(W) x 93(H) x 170(D) mm.
Weight: About 2.9 lbs.
