Description: The SB-TEK used to demonstrate different flow processes at different control structures in the open channel. In the closed channel, pressure components in a pipe are determined. The trainer includes a transparent experimental flume with upper limit, a height-adjustable sill and a closed water circuit. The water level in the experimental section is set with an adjustable plate weir at the water outlet. With a simple alteration, the experimental flume can be used as an open or closed channel. The water level must be low when investigating the open-channel flow. To conduct the experiment, a weir is attached to the bottom of the channel or the height-adjustable sill is used. Furthermore, the discharge under a gate can also be demonstrated. Various weirs, which can be exchanged quickly and safely, are available as control structures.
Features:
Investigation of flow processes in the open and closed channel.
Flow processes in the open channel: gate, sill and various weirs.
Closed water circuit with supply tank and pump.
Discharge under a gate.
Fully flowed through experimental section and change in cross-section over sill for experiments in the closed channel.
Transparent measuring tubes for measuring static pressure and total pressure.
Discharge under a gate.
Hydraulic jump.
Closed channel.
Pipe flow with constant and variable flow cross- section.
Measurement of static pressure and total pressure.
Calculation of the flow velocity.
Specification:
Experimental section Length: 1m.
Cross-section W x H: 40x300mm.
Supply tank: 70L.
Pump Power consumption: 250W.
Max. Flow rate: 150L/min.
Max. Head: 7.6m.
230V, 50Hz, 1 phase.
