Technical Specification:
Controlling Panel:
1. PLC-01Nos, PLC Input-12, PLC Output-8.
2. 7inch HMI-01Nos.
3. Ethernet Communication Cable-01Nos.
4. Temperature Controller with Sensor/01Nos.
5. Digital Timer- 01Nos.
6. Digital Twin Timer- 01Nos.
7. Digital Counter with Relay Controlling.
8. Photo Sensor (NPN & PNP)- 03Nos.
9. Proximity Sensor (NPN & PNP)- 03Nos.
10. 8 Output Indicator & Pin out.
11. 24V Power Supply.
12. Push Switch- 08Nos.
13. PLC Input Pin out.
14. PLC Output Pin out.
15. Main Circuit Breaker.
16. Individual AC Circuit Breaker.
17. Individual DC Circuit Breaker.
18. AC Output Display & Indicator.
19. DC Output Display & Indicator.
20. Magnetic Conductor- 08Nos.
21. Relay- 08Nos.
22. Heavy metal Casing, Protective Enclosure with Lock.
23. Panel Dimension (Whole): 1400mm x 1830mm x 305mm.
Pick and Place Module:
1. Double-Rod Aluminum Alloy Cylinder-01Nos.
2. Actuator Air Gripper Cylinder- 01Nos.
3. Attached Guide and Speed Controller
Horizontal left, right sensing Auto switch.
4. Vertical up/down sensing Auto switch.
5. Relay- 03Nos
Human Machine Interface HMI:
1. Display Type: 7-inch TFT LCD.
2. Resolution: 800 x 480 pixels.
3. Backlight: LED.
4. Display Size: 154.08 x 85.92mm.
5. Operation System: Delta Real-Time OS.
MCU:
1. 32-bit RISC Microcontroller.
2. SD RAM: 64 Mbytes.
3. Buzzer: Multi-Tone Frequency 2K ~4K
Hz85dB.
4. Operation Voltage: DC +24V)
Air Compressor:
1. Condition: New.
2. Type: PISTON.
3. Configuration: PORTABLE.
4. Power Source: AC220V.
5. Lubrication Style: Lubricated.
6. Working Pressure: 8 bar.
7. Motor power: 0.75KW 1HP.
8. Pressure: 8Bar 115PSI, 0.8Mpa
9. Type of the air compressor: Direct-driven
Heavy Metal Box.
10. Module Dimension: 710mm x 510mm.
VFD:
1. 1.5kw VFD (230V 1/3 Phase), 1/2 Horse
Three Phase Induction Motor.
2. Three Phase Circuit Breaker.
3. A potentiometer.
4. Power Indicator
Pneumatic Sorting Module:
1. Conveyor belt motor (speed and
directional control).
2. Infrared beam sensors-03Nos.
3. Electro-pneumatic valves- 03Nos.
4. Pneumatic single-acting cylinders- 03Nos.
5. Pneumatic cylinder position sensors-
03Nos.
6. Status indicator lamps- 02Nos.
7. Start/stop buttons- 02Nos,
8. Manual control input switches - 07Nos.
9. Heavy Rubber Belt size 23×3 inch
10. Heavy Metal Box.
11. Module Dimension: 710mm x 510mm.
Liquid Mixing Module:
1. Water level sensor- 10 Nos.
2. Solenoid valve- 04Nos.
3. Water Pump- 03Nos.
4. Mixing Motor- 01Nos.
5. Input Connector- 10 Nos.
6. Output Connector- 07Nos.
7. Output Relay- 08Nos.
8. Mixing Tank- 01Nos.
9. Water Tank- 03Nos.
10. Pump Water Tank- 03Nos.
11. Aluminum body.
12. 24volt Power Supply- 01Nos.
13. Selector Switch for ON/OFF- 01Nos.
14. Push Button switch- 02 Nos.
15. Pneumatic Fittings.
16. Dimension: 860mm X 760mm X
305mm.
Conveyor Belt & Bottle Filling
Module:
1. Heavy Rubber Belt.
2. 24 Volt Power Supply.
3. DC Gear Motor- 01Nos.
4. Photo Sensor- 03Nos.
5. Proximity Sensor- 01Nos.
6. Sensor Pinout.
7. Relay Output Pin out.
8. Four Relay.
9. Control Box.
10. Solenoid Valve- 01Nos.
11. DC Water Pump- 01Nos.
12. Water tank- 01Nos.
13. Connecting Cable.
14. Acrylic Body.
15. Belt Size: 584mm x 76mm.
16. Module Dimension: 813mm x
457mm.
17. Stepper
motors,
Temperature
sensor, Light sensor, Potential
dividers and their use Transistors as
switches.
Use of relays:
1. ECU action and function, Automotive
control systems, Sensor and actuator
waveforms and signals, Sensor and
motor faults
Accessories:
1. Connecting Wire: 1 set.
2. User Manual: 1 Nos.
3. Standard Accessories.
