Description: Support multiform MCU of independent module structure. Support CPLD module for digital circuit experiment. Functional modularity of application. Provide analysis and measurement module for improving the efficiency of MCU learning. Support various interfaces for signal connections between MCU and module. Measurement points for signal analysis. Provide multiform program experiments for the basis and project experiments. Features: Devices of ATmega128, 89C51, PIC18F6722 designed to be modules of connector structure which mountable and removable, allowing multiform microcontroller training. CPLD module installed to perform the digital circuit design education at the same time. Provide a configuration that multiform connects MCU module and functional module. Each functional module installed and removed so users can use application design type they want by utilizing functional modules separated from the base board user wants. Provide the signal and power analysis modules th
Technical Specifications:
MCU:
AVR: Up to 8MIPS Throughput at 8MHz JTAG Interface, ISP Program 128k Bytes FLASH, 4k Bytes Internal SRAM 4K Byte EEPROM. 8-channel PWM, 8-channel 10-bit ADC I2C, Dual UART
Application:
PLD: CPLD: Logic Gate CPLD Built in Clock Manage Block.
Display: LED: 16Digit RED LED
FND: 2Digit 7-Segment
FND: 4Digit Array 7-Segment
Text LCD: 2Line 16char Text LCD Back Light OLED: 128 *128 Dot, 262k Color
Motor: Step Motor: 5V
Stepping Motor Relay: Dual Channel Relay 2EA Memory: SRAM: 512k bits (65,536 *8bit)
EEPROM: 16k bits (2k * 8bit), I2C Interface FLASH: 512k bits (65,536 *8bit, SPI Interface Audio: Piezo: Piezo 1EA.
Sound: Stereo Codec (Up to 96k), MIC Input 1 Port, Stereo Speaker Output 1 Port.
DAC: Parallel DAC: 800k SPS, 8bit.
Interface Serial DAC: 300k SPS, SPI Interface Sensor: Temperature: -40 ~ 124? Range, I2C I/F Humidity: 0 ~ 100% Range, I2C I/F Photo Diode: Visible Light Sensor
Cds: Infrared Light Sensor
Interface: RS232: Up to 460kbps Data rate
USB: Up to 1Mbps Data rate, RS232 to USB Interface
Measure: Frequency: Up to 100kHz Freq Measure Frequency & Duty Display Analysis: Interrupt: 8-Interrupt Input analysis Rising, Falling State
Display Input: Key Pad: 3 x 4 Key Pad
Switch: Push Button 8EA, 16 Step Rotary Switch, 8 Pole DIP Switch Power: 5V / 6A, 3.3V /5A.
Module Specifications:
AVR Module:
ATmega128 Up to 8MIPS JTAG, ISP Interface
128k Byte Flash, 4k Byte Internal SRAM 4k Byte Internal EEPROM 32.768k Crystal on board Size: Min. 80mm x 60mm 49 Test Point
CPLD Module:
EPM570 15K Logic Gates
JTAG Programmer Interface
1Hz ~ 10MHz 16 Step Clock Manager 56 User I/O
Size: Min. 80mm x 60mm 56 Test Point
FND Module:
Common Cathode 2EA Red Color
Size: Min. 56mm x 45mm 16 Test Point
Array FND Module:
Min. 4 Digit Dynamic Array FND Red Color
Size: Min.56mm x 45mm 12 Test Point
LED Module:
High Brightness 16EA Red Color
Size: Min. 56mm x 45mm 16 Test Point
Text LCD Module: 16Char * 2Line Text LCD Small Size, Back Light Size: Min. 56mm x 45mm 11 Test Point
OLED Module:
128 * 128 Dot 262k Full Color
Date Display Interface Easy Display Interface
(Text LCD Interface Compatible) Size: Min. 56mm x 60mm
13 Test Point
Step Motor Module:
2Full Step Control Interface Display LED 4EA Magnetic Sensor
Round Monitor LED 2EA Size: Min. 56mm x 60mm 5 Test Point
Memory Module:
SRAM (256k bits SRAM)
External Memory Interface Serial EEPROM
(16k bits EEPROM)
I2C Interface Serial Flash (512k bits Flash) SPI Interface
Size: Min. 56mm x 45mm 25 Test Point
Audio Module:
Stereo Sound Codec (Up to 96k) MIC Input 1Port
Stereo Head Phone Output 1Port Serial (SPI) Interface
Piezo Out 1Port
Size: Min. 56mm x 45mm 9 Test Point
UART Module:
USB Interface
RS232 to USB Interface
Throughput Speed: Max 1M bps RS232 Interface
Throughput Speed: Max 115,200 bps Size: Min. 56mm x 45mm
Test Point
Sensor Module:
Temperature: -40 ~ 124? Range, I2C
Interface Humidity: 0 ~ 100% Range,I2C Interface
Photo Diode, CdS: Visible Light, Infrared Light Sensor
Size: Min. 56mm x 45mm
Test Point
DAC Module:
Parallel DAC
800k SPS, 8bit Interface
2 DAC Channel Serial DAC
800k SPS, SPI Interface
High Quality Interface (SMA Interface)
Size: Min. 56mm x 45mm 15 Test Point
Interrupt Analysis Module: 8 Port Interrupt Monitor Interrupt Status Display (Rising, Falling)
Size: Min. 56mm x 60mm 16 Test Point
Frequency Measure Module: Clock Signal Analysis Module Frequency & Duty Analysis Frequency & Duty display included 2 Channel Input
500 ~ 500k Input Range Size: Min. 56mm x 60mm 2 Test Point
Relay Module:
Dual Channel Relay 2EA Up to 1A 30V DC
Size: Min. 56mm x 45mm 14 Test Point
Switch Module:
Push Button Switch 8EA 8 Pole DIP Switch
16 Position Rotary Switch Size: Min. 56mm x 60mm
20 Test Point
Key Pad Module:
3 Colum * 4 Row Key Pad Size: Min. 56mm x 60mm
7 Test Point
Contents of Education:
Introduction to Microcontroller: AVR Micro Controller. AVR Micro Controller Development Environment Functions of Microcontroller: GPIO I/O Control. Internal Memory. Interrupt
Timer and Counter. Timer and PWM. UART. A/D Converter. External Memory Interface. Serial Interface.
Applications of Microcontroller: Rotating Step Motor. Pin Pad using Key PAD. LED brightness control using DAC function. Digital frame using OLED
Supplied with: ISP Programmer, AC Power Cable, A to B type USB cable, Jumper Cable, Byte blaster for CPLD, Parallel Cable for CPLD, User’s manual and product CD.
